Search Suggestions
Arduino Uno R3
101能通过USB或者外部电源接口供电。两者同时供电时,电路能自动进行切换。外部电源接口可以接交流转直流的适配器供电,也可以使用电池供电。电源相关引脚如下:
Arduino Uno R3
101能通过USB或者外部电源接口供电。两者同时供电时,电路能自动进行切换。外部电源接口可以接交流转直流的适配器供电,也可以使用电池供电。电源相关引脚如下:
  • SKU: #2147483647
  • 库存: 暂无库存
介绍:

The Particle Boron is a LTE CAT-M1/NB1 enabled development board that allows you to connect your mesh network over a cellular service. With the Nordic nRF52840 SoC and two SARA cellular modules you have all the power of an ARM Cortex M4 with OpenThread mesh networking, LTE cellular connectivity, NFC, plenty of GPIOs, LiPo charging and more. The board is designed to act as a standalone cellular endpoint or an LTE enabled gateway for a Particle Mesh network.

This LTE IoT development kit from Particle includes the Boron LTE development board, a breadboard, a cellular flex antenna, and a USB cable. The starter project includes two resistors of 220Ω, one red LED, and one photodiode.

The Boron is also configured in the popular Feather footprint and so is compatible with Feather Shields! This includes a JST connector for a Li-po battery as well as charging of the battery over USB. Particle also provides an RGB status LED and a JTAG (SWD) connector for debugging and an onboard PCB antenna for your mesh network. You will need to connect a cellular antenna to the U.FL connector to use the cellular connectivity.

The Boron comes with access to the Device Cloud (10 free micro networks available) as well as three free months of device Cloud access using a cellular gateway. The Particle Could has some great features for building connected projects, including over-the-air firmware updates, and easy-to-use REST API, and firmware development supported by web and local IDEs.

输入电压
7-12V
额定电压
5V

全新体验

俱乐部

了解更多

免运费 1~2 天送达

购物满60元即享免运费

付款方式